Z Series E85 Z4 3.0i (M54) ROADST
11 61 050
Removing and installing intake air manifold
(M54)
Necessary preliminary tasks:
•
Instructions for disconnecting and connecting battery.
Disconnect negative battery lead.
•
Remove engine cover.
•
Remove left tension strut.
•
Remove intake filter top section.
•
Remove intake pipe.
•
Remove sound generator.
Important!
Do not mix up oxygen monitor sensors for cylinders 1 to 3
and 4 to 6 at plug connection to wiring harness. Mark plug
connections.
Unclip plug connections (1) from holders.
Press lock and detach vent hose.
Remove clips (1).
Detach terminal strip (3) from fuel injectors and place to one side.
RA Removing and installing intake air manifold (M54)
BMW AG - TIS
15.02.2013 11:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -