Z Series E85 Z4 3.0i (M54) ROADST
12 90 100
Replacing fan for electronics box (N52)
Unfasten screws.
Open electronics box cover (1).
Release relay plug on reverse side of cover.
Remove cover.
Installation:
Make sure that cover is correctly inserted in hinges of electronics
box lower section (watertightness).
Raise control unit slightly.
Unlock plug connection (1) and detach from equipment carrier.
Unfasten plug connection and disconnect.
Lever out expander rivet.
Release screws (1).
Remove cover (2).
Unfasten screws.
Remove fan (1).
RA Replacing fan for electronics box (N52)
BMW AG - TIS
15.02.2013 12:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
