Z Series E85 Z4 3.0i (M54) ROADST
13 64 541
Replacing all fuel injectors
Necessary preliminary tasks:
•
Switch off ignition
•
Remove complete injection pipe
Detach retainer (1).
Detach fuel injector from injection pipe.
Installation:
Check sealing rings, replace if necessary.
Insert fuel injector fully into injection pipe then pull out until groove
is flush with edge of injection pipe.
Push on retainer.
Installation:
Coat sealing rings of fuel injectors with anti-seize agent to facilitate
fitting of injection pipe.
RA Replacing all fuel injectors
BMW AG - TIS
15.02.2013 12:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
