Z Series E85 Z4 3.0i (M54) ROADST
16 12 010
Removing and installing/replacing carbon
canister (with tank leakage diagnosis module)
Necessary preliminary tasks:
•
Remove rear right wheel arch trim
Disconnect plug connection (1).
Unlock lines (2) to (4) and detach.
(2)
Scavenging air line
(3)
Vent line to tank
(4)
Evaporation line
Release screws and remove carbon canister with tank leakage
diagnosis module towards bottom.
Installation:
Tightening torque 16 13 2AZ.
RA Removing and installing/replacing carbon canister (with tank leakage diagnosis m
BMW AG - TIS
15.02.2013 13:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -