Z Series E85 Z4 3.0i (M54) ROADST
Pull lock (1) upwards and detach coolant hose from coolant
expansion tank.
Illustration with radiator removed.
Pull coolant expansion tank upwards slightly out of carrier plate
and pull out lower connection piece. Then tilt expansion tank to
rear and remove.
Installation:
Check sealing rings. Do not under any circumstances coat sealing
rings with antiseize agent before installation.
Retaining lug must engage in opening on carrier plate.
RA Removing and installing/replacing coolant expansion tank (M54, N46)
BMW AG - TIS
15.02.2013 13:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
