Z Series E85 Z4 3.0i (M54) ROADST
Remove exhaust bracket from transmission.
Remove exhaust bracket from manifold.
Support engine at front with a hydraulic lifter.
Important!
Do not allow transmission to hang on transmission input shaft
when removing and installing, as the clutch disc will be
deformed.
Release transmission screws on engine.
Tightening torque: 23 00 1AZ
.
Pull out transmission as far as possible towards rear, turn approx.
10
°
in counterclockwise direction and remove.
RA Removing and installing transmission (GS6-37BZ / H-transmission)
BMW AG - TIS
15.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
