Z Series E85 Z4 3.0i (M54) ROADST
Release screw (1).
Tightening torque 23 41 7AZ
.
Installation:
Make sure retainer (2) for heat shield is correctly positioned.
Release stud bolt (1) and screw (2).
Tightening torque 23 41 7AZ
.
Remove expansion tank in direction of arrow.
Installation:
Replace sealing ring.
Moisten sealing ring (1) with Pentosin and push onto tank fitting.
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
RA Replacing expansion tank GS6S37BZ (SMG)
BMW AG - TIS
15.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
