Z Series E85 Z4 3.0i (M54) ROADST
23 42 509
Replacing pressure sensor GS6S37BZ (SMG)
Important!
Before working on hydraulic system:
-
Reduce pressure in hydraulic system by means of
Service Function in DIS Tester
-
Disconnect hydraulic pump relay in electronics box
Do not reconnect relay for entire duration of repair work
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
Necessary preliminary tasks:
•
Remove assembly underside protection (E60 only)
Release screws (1) and remove protective plate.
Tightening torque 23 41 7AZ
.
RA Replacing pressure sensor GS6S37BZ (SMG)
BMW AG - TIS
15.02.2013 13:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
