Z Series E85 Z4 3.0i (M54) ROADST
Disconnect plug and release pressure sensor (2).
Tightening torque 23 41 10AZ
.
Installation:
Replace sealing ring.
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
RA Replacing pressure sensor GS6S37BZ (SMG)
BMW AG - TIS
15.02.2013 13:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -