Z Series E85 Z4 3.0i (M54) ROADST
23 42 560
Replacing clutch actuator GS6S37BZ (SMG)
Important!
Before working on hydraulic system:
-
Reduce pressure in hydraulic system by means of
Service Function in DIS Tester
-
Disconnect hydraulic pump relay in electronics box
Do not reconnect relay for entire duration of repair work
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
Necessary preliminary tasks:
•
Remove assembly underside protection (E60 only).
Unlock connector and remove.
Unlock and disconnect line (1).
Installation:
Replace sealing ring.
Release nuts (2) and remove clutch actuator (3).
Tightening torque 21 52 5AZ
.
RA Replacing clutch actuator GS6S37BZ (SMG)
BMW AG - TIS
15.02.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
