Z Series E85 Z4 3.0i (M54) ROADST
24 12 019
Replacing radial seal for output flange
(A5S 325Z)
Note:
After completing work, check transmission fluid level and
top up if necessary,
refer to 00 11 500.
Removing complete exhaust system,
refer to 18 00 020.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Remove heat shield (1).
Remove heat shield (1).
RA Replacing radial seal for output flange (A5S 325Z)
BMW AG - TIS
15.02.2013 14:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
