bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Transmission Extension (A5S 325Z)|Page 834 > < 1 RA Replacing Radial Seal For Output Flange (A5S 325Z)|Page 832
Page 1
background image

24 13 001

Removing and installing transmission
extension (A5S 325Z)

Note:

After completing work, check transmission oil level and top up if
necessary.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

Remove complete exhaust system,

refer to 18 00 020.

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Remove heat shield (1).

Remove heat shield (1).

RA  Removing and installing transmission extension (A5S 325Z)

BMW AG - TIS

15.02.2013  14:04

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Transmission Extension (A5S 325Z)|Page 834 > < 1 RA Replacing Radial Seal For Output Flange (A5S 325Z)|Page 832