Z Series E85 Z4 3.0i (M54) ROADST
24 34 877
Replacing pulse generator (output speed)
(A5S 325Z)
Note:
After completing work, top up ATF level.
Check/top up fluid level in automatic transmission,
refer to 00 11 500.
Transmission oil sump removed.
Remove and install transmission oil sump,
refer to 24 11 003.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Unscrew bolt (1).
Remove pulse generator (2).
Installation:
Tightening Torque,
refer to Technical Data 24 34 7AZ.
Detach plug (1) from pulse generator (2).
RA Replacing pulse generator (output speed) (A5S 325Z)
BMW AG - TIS
15.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
