Z Series E85 Z4 3.0i (M54) ROADST
Important!
Align lower end of coil spring (1) as pictured to spring pad.
Relieve tension on coil spring.
Check installation position of gaiter, correct fold if necessary.
Note:
End of coil spring (1) must not touch against shoulder of spring
pad.
Recess (2) only serves to reinforce and correctly seat the spring
pad and does not serve as a stop for the spring end.
After installation:
•
Carry out wheel alignment check if a spring strut with support
bearing was or has been installed without centering pin.
RA Replacing front left or right spring strut shock absorber
BMW AG - TIS
15.02.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
