Z Series E85 Z4 3.0i (M54) ROADST
32 31 241
Replacing adjusting lever for steering column
Necessary preliminary tasks:
•
Remove steering column
Slacken nut.
Secure clamping bearing (by hand, adhesive tape).
Remove nut (1), needle bearing (2), slide (3) and compression
spring (4).
Pull out adjusting lever.
Installation:
-
The adjusting lever unit is supplied in assembled state with a
transportation lock (5).
-
Remove transportation lock (5) and install preassembled
adjusting lever.
Important!
Clamping bearing (6) must be secured while transportation
lock (5) is being removed until insertion into steering column.
Incorrect assembly will result in malfunction.
RA Replacing adjusting lever for steering column
BMW AG - TIS
15.02.2013 15:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -