Z Series E85 Z4 3.0i (M54) ROADST
Installation:
Replace nut.
Screw on nut a few turns.
Move adjusting lever into locked position.
Tighten nut to torque.
Tightening torque: 32 31 3AZ
.
Important!
Observe tightening torque without fail.
The clamping force is adjusted by means of the tightening
torque.
RA Replacing adjusting lever for steering column
BMW AG - TIS
15.02.2013 15:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
