Z Series E85 Z4 3.0i (M54) ROADST
33 31 011
Replacing rear axle carrier
Necessary preliminary tasks:
•
Remove rear axle carrier
Remove rear differential.
If necessary, remove holder with ride-height sensor from rear axle
carrier.
Remove lower control arm on both sides from rear axle carrier.
Remove upper control arm on both sides from rear axle carrier..
Remove trailing arm on both sides with output shaft and all
suspension arms.
After installation:
•
Adjust handbrake
•
Perform chassis alignment check
RA Replacing rear axle carrier
BMW AG - TIS
15.02.2013 16:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
