Z Series E85 Z4 3.0i (M54) ROADST
33 31 503
Lowering/raising rear axle carrier
Special tools required:
•
33 4 420
Note:
If the rear axle carrier is detached from the body, it is necessary
after reinstallation to carry out a wheel/chassis alignment check.
Necessary preliminary tasks:
•
Remove propeller shaft from rear differential and tie back
Disengage handbrake Bowden cables (2) from fixture (1).
Installation:
Make sure handbrake Bowden cables (2) are correctly seated in
assembly pan.
RA Lowering/raising rear axle carrier
BMW AG - TIS
15.02.2013 16:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
