Z Series E85 Z4 3.0i (M54) ROADST
34 11 519
Removing and installing/replacing left or right
front brake caliper
Necessary preliminary tasks:
•
Remove wheels.
After completing work: Bleed braking system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are
reconnected.
This prevents brake fluid from emerging from the expansion tank
and air from entering the system when the brake lines are opened.
Important!
Grip brake hose at square drive to prevent connecting piece
from turning in retaining bracket.
Disconnect brake hose from brake line (1).
Installation:
Tightening torque 34 32 1AZ
.
Important!
Make sure the retaining clip is correctly fitted.
Remove retaining clip (2) and pull brake hose out of holder.
Detach brake hose (3) from brake caliper.
Installation:
Tightening torque 34 32 2AZ
.
RA Removing and installing/replacing left or right front brake caliper
BMW AG - TIS
15.02.2013 16:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
