Z Series E85 Z4 3.0i (M54) ROADST
51 16 248
Removing and installing/replacing lock on
rear storage box
Necessary preliminary tasks:
•
Remove cover on panel for rear storage box
Release screws (1) on lock (2).
Installation:
Press lock (2) to right (3) and tighten screws (1).
Release spring washer (1) and pull out pin with spring
washer (2).
Disconnect cable (3) from mounting (4).
Pull trims (1) in direction of arrow and pull out lock (2) in
direction of arrow towards bottom.
Feed cable (3) out of guides (4)
Remove lock (2).
Installation:
Join lock and servomotor correctly.
Lay emergency release cable (3) correctly in guides (4) of
lock (2).
RA Removing and installing/replacing lock on rear storage box
BMW AG - TIS
16.02.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -