Z Series E85 Z4 3.0i (M54) ROADST
51 45 185
Removing and installing/replacing trim for
pedal assembly
Release screws (1).
Pull back panel for pedals (3) in direction of arrow.
Disconnect footwell light plug connection (2) and remove panel
for pedals (3).
Replacement:
Remove footwell light.
Installation:
Make sure guides (4) of panel for pedals (3) are correctly seated
in associated mountings.
Make sure panel for pedals (3) is correctly seated on footwell
vent above.
RA Removing and installing/replacing trim for pedal assembly
BMW AG - TIS
16.02.2013 01:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
