Z Series E85 Z4 3.0i (M54) ROADST
54 31 140
Removing and installing/replacing convertible
top catch turn cross
Necessary preliminary tasks:
•
Do not remove convertible top
•
Remove actuating rods on catch (remove convertible top
catch)
Loosen screws (1).
Tightening torque: 54 31 15AZ
.
Remove reinforcement brace (2).
Release screws (3) from turn cross (4).
Remove turn cross towards bottom front.
Installation:
Basic adjustment is necessary in event of replacement.
RA Removing and installing/replacing convertible top catch turn cross
BMW AG - TIS
16.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
