Z Series E85 Z4 3.0i (M54) ROADST
54 31 017
Removing and installing/replacing main
mount for convertible top
Necessary preliminary tasks:
•
Remove convertible top
Only on right side:
Disconnect cable tie (1), release screw (2), if necessary raise
convertible top (4) slightly and remove micro-switch (3) towards
top.
Note:
Further information in MG 61
Release pins (1 and 2) and remove.
Unscrew bolt (3).
Tightening torque: 54 31 14AZ
.
Unclip cover.
Mark position of screw heads (1).
RA Removing and installing/replacing main mount for convertible top
BMW AG - TIS
16.02.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -