Z Series E85 Z4 3.0i (M54) ROADST
61 12 067
Replacing wiring harness for rear bumper
Necessary preliminary tasks:
•
Remove rear bumper trim
Unlock and disconnect plug connections (1) from ultrasonic
converter.
Cut cable ties (2) and remove wiring harness.
Installation:
Make sure wiring harness is correctly laid.
RA Replacing wiring harness for rear bumper
BMW AG - TIS
16.02.2013 03:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
