Z Series E85 Z4 3.0i (M54) ROADST
61 31 068
Removing and installing/replacing switch for
passenger airbag deactivation
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove right fresh-air grill
Disconnect plug connection (1).
Unlock catches (4) and feed switch for front passenger airbag
deactivation (2) in direction of arrow out of instrument panel
trim (3).
Installation:
Make sure switch for front passenger airbag deactivation (2) is
correctly seated in instrument panel trim (3).
Replacement:
Remove lock cylinder for passenger airbag deactivation.
RA Removing and installing/replacing switch for passenger airbag deactivation
BMW AG - TIS
16.02.2013 04:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
