Z Series E85 Z4 3.0i (M54) ROADST
64 11 943
Replacing evaporator temperature sensor
Necessary preliminary tasks:
•
Remove airbag module for driver's knee protection.
•
Remove radio receiver.
•
Remove cover.
Unlock plug connection (1) and disconnect.
Unlock socket housing (2) and remove.
Unclip left footwell channel (4).
Installation:
Make sure left footwell channel (4) is correctly seated in retainer
(3).
Unclip left footwell channel (1) and remove.
Installation:
Make sure left footwell channel (1) is correctly seated in retainer
(2).
Pull out holder (1) with evaporator temperature sensor (2) in
direction of arrow.
Installation:
Make sure evaporator temperature sensor (2) is correctly seated
in holder (1).
Make sure holder (1) is correctly seated in heater - A/C housing.
RA Replacing evaporator temperature sensor
BMW AG - TIS
16.02.2013 05:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
