Z Series E85 Z4 3.0i (M54) ROADST
Note:
If the A/C system remains open for longer than one hour, the
refrigerant lines must be sealed off with seal plugs.
In event of warranty application, seal line openings with plugs of
new dryer bottle.
Release screws (1).
Detach refrigerant lines (2) in direction of arrow and press slightly
to one side.
Installation:
Replace sealing rings.
Tightening torque = 20 Nm (64 53 1AZ)
.
Gently release screws (3).
Pull out dryer bottle for A/C system (4) towards top.
After installation:
•
Evacuate and fill A/C system
RA Removing and installing / replacing drier bottle for air conditioner
BMW AG - TIS
16.02.2013 05:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -