Z Series E85 Z4 3.0i (M54) ROADST
65 12 072
Removing and installing (replacing) amplifier
(Top hi-fi system)
Necessary preliminary tasks:
•
Take out trunk floor trim panel.
•
Disconnect and cover battery negative lead.
Note:
If necessary, remove tool bag.
Unscrew bolt (1).
Take off holder (2).
Raise right amplifier (3) a little.
Unfasten plug connection (4) and disconnect.
Guide amplifier (3) in direction of arrow past loading sill
cover (5) and remove.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
RA Removing and installing (replacing) amplifier (Top hi-fi system)
BMW AG - TIS
16.02.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
