Z Series E85 Z4 3.0i (N52) ROADST
Attach special tool 11 8 330 in conrod big end.
Press out conrod and piston to cylinder head side.
Important!
Risk of damage to oil spray nozzle.
Preliminary work:
Clamp special tool 11 4 491 in a vice.
Secure piston (1) with conrod to special tool 11 4 491 .
Warning!
Protective goggles must be worn for the next work step.
Warning!
Protective goggles must be worn.
Lever out piston circlip with special tool 11 4 492 in direction of
arrow.
RA Removing and installing/replacing all pistons (N52)
BMW AG - TIS
15.02.2013 16:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -