Z Series E85 Z4 3.0i (N52) ROADST
11 33 050
Removing and installing/replacing all rocker
arms (N52)
Special tools required:
•
11 4 480
Necessary preliminary tasks:
•
Remove cylinder head cover.
•
Remove intermediate lever.
•
Remove exhaust camshaft.
Important!
Rocker arms (1) are divided into bearing categories.
The tolerance classes are designated as illustrated with
numbers from 1 to 5.
Already used rocker arms (1) may only be reused in the
same position.
Detach roller cam followers (1) from HVC element and remove.
Set all roller cam followers down in special tool 11 4 480 in a
tidy and orderly fashion.
Installation:
Before installing exhaust camshaft and intermediate lever, make
sure roller cam followers are correctly seated.
RA Removing and installing/replacing all rocker arms (N52)
BMW AG - TIS
15.02.2013 16:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
