Z Series E85 Z4 3.0i (N52) ROADST
11 53 000
Removing and installing/replacing coolant
thermostat (N52)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Remove front splash guard.
•
Drain coolant from radiator.
Release hose clamp (1) and detach coolant hose.
Release hose clamp (2) and detach coolant hose.
Unlock and detach coolant hose (3).
Unlock and detach coolant hose (4).
Disconnect plug connection (5).
Release screws (6).
Tightening torque: 11 53 1AZ
.
Remove coolant thermostat (7).
Note:
RA Removing and installing/replacing coolant thermostat (N52)
BMW AG - TIS
15.02.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
