Z Series E85 Z4 3.0i (N52) ROADST
12 14 524
Replacing exhaust camshaft pulse generator
(N52, N52K, N51, N53)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
If necessary, remove radiator cover
Unlock plug (1) and remove.
Release bolt.
Installation:
Replace screw.
Tightening torque 12 14 4AZ
.
Remove pulse generator (2).
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing exhaust camshaft pulse generator (N52, N52K, N51, N53)
BMW AG - TIS
15.02.2013 17:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
