Z Series E85 Z4 3.0i (N52) ROADST
13 72 001
Replacing air filter element (N52)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
Unlock plug (1) and remove.
Unfasten clip.
Open clips (2).
Remove top section (3) of intake filter housing.
Remove air cleaner element (1).
Installation:
Clean upper and lower sections of intake filter housing from
inside.
Install new air cleaner element.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing air filter element (N52)
BMW AG - TIS
15.02.2013 17:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
