Z Series E85 Z4 3.0i (N52) ROADST
17 00 005
Draining and adding coolant (N52)
Warning!
Danger of scalding!
These tasks on the cooling system should only be carried out
on an engine that has cooled down!
Important!
Lifetime coolant filling:
If removing radiator, oil-water heat exchanger or transmission
oil cooler, do not reuse drained coolant!
Installation:
Use only recommended coolant.
Observe mixture ratio (antifreeze/water).
Recycling
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Follow instructions for working on cooling system
•
Remove front underbody protection
•
Remove radiator cover
RA Draining and adding coolant (N52)
BMW AG - TIS
15.02.2013 17:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -