Z Series E85 Z4 3.0i (N52) ROADST
Draining coolant:
Open cap (1) on coolant expansion tank.
Open drain plugs (1 and 2) on radiator at bottom.
Drain, catch and dispose off coolant.
Installation:
Replace sealing rings.
Tightening torque 17 11 2AZ
.
Unfasten and detach coolant hose (1) from thermostat housing.
Drain, catch and dispose off coolant.
Adding coolant:
Use only recommended coolant.
Installation:
Observe venting instructions without fail.
Fill and vent cooling system.
Check cooling system for leaks.
RA Draining and adding coolant (N52)
BMW AG - TIS
15.02.2013 17:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
