Z Series E85 Z4 3.0i (N52) ROADST
Exhaust manifold, rear:
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Clean sealing faces, replace gaskets.
Coat threads with copper paste.
Replace nuts.
Tightening torque 18 40 1AZ.
Exhaust manifold, front:
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Clean sealing faces, replace gaskets.
Coat threads with copper paste.
Replace nuts.
Tightening torque 18 40 1AZ.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing both exhaust manifolds (N52)
BMW AG - TIS
15.02.2013 18:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -