Z Series E85 Z4 3.0i (N52) ROADST
23 11 608
Replacing guide tube for clutch release unit
(GS6-17BG/DG)
Necessary preliminary tasks:
•
Remove transmission
•
Remove clutch controller and release lever from guide tube.
Release screws.
Remove guide tube.
Tightening torque: 23 11 2AZ
.
Installation:
Replace screws.
Clean new guide tube.
Guide surface must be clean (no labels/stickers or residual
adhesive, etc.).
RA Replacing guide tube for clutch release unit (GS6-17BG/DG)
BMW AG - TIS
15.02.2013 18:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
