Z Series E85 Z4 3.0i (N52) ROADST
32 31 090
Removing and installing steering column
Special tools required:
•
32 3 180
Note:
Analysis will be refused by the manufacturer if the centering
element is omitted! Defective steering columns must therefore be
locked with the centering element.
Necessary preliminary tasks:
•
Disconnect negative lead from battery
•
Remove trim panel for pedal assembly
•
Remove air duct in footwell
Move steering wheel to straight-ahead position and remove
ignition key.
Lock steering column with special tool 32 3 180 .
Important!
The special tool 32 3 180 may only be removed again when
the steering column has been connected to the steering gear!
RA Removing and installing steering column
BMW AG - TIS
15.02.2013 19:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -