Z Series E85 Z4 3.0i (N52) ROADST
Note:
The steering column is shown remove in order to simplify the depiction of the screw fastening points.
Release screws (1, 2).
Remove steering column.
Installation:
Screws (1): M8 x 36
Screws (2): M8 x 70
Tightening torque 32 31 6AZ
.
Replacement:
Important!
The replacement steering column is secured with a centering
element. This centering element may only be removed when
the new steering column has been fitted in the vehicle and
connected to the steering gear.
Then insert hub centering element into removed steering
column in place of special tool 32 3 180 .
Analysis will be refused by the manufacturer if the centering
element is omitted! Defective steering columns must be
locked with the centering element without fail!
RA Removing and installing steering column
BMW AG - TIS
15.02.2013 19:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
