Z Series E85 Z4 3.0i (N52) ROADST
32 33 001
Removing and installing/replacing steering
wheel
Note:
Wheel/chassis alignment is not necessary after the steering wheel
has been removed and installed or replaced.
Necessary preliminary tasks:
•
Remove airbag unit
Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection(s).
Release screw and remove steering wheel.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ
.
Installation:
Align steering wheel using markings (arrows) to steering column
and attach.
RA Removing and installing/replacing steering wheel
BMW AG - TIS
15.02.2013 19:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -