Z Series E85 Z4 3.0i (N52) ROADST
34 52 550
Removing and installing/replacing DSC III yaw
sensor (DSC sensor)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right front seat.
•
Remove front right entrance cover strip.
Note:
The DSC sensor contains the functions of the transversal
acceleration sensor and the yaw sensor.
Fold carpet (1) to one side and expose DSC sensor (2).
Important!
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may
be malfunctions in the DSC.
Unlock and disconnect plug (1).
Release screws (2) and remove DSC sensor (3) with holder.
Installation:
Tightening torque 34 51 4AZ
.
RA Removing and installing/replacing DSC III yaw sensor (DSC sensor)
BMW AG - TIS
15.02.2013 21:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
