Z Series E85 Z4 3.0i (N52) ROADST
35 31 000
Removing and installing / replacing clutch
pedal
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Disconnect return spring.
Press bolt ends (1) together and remove bolt.
Remove retainer (2) and detach clutch pedal from bearing
pedestal.
Installation:
Check bearing bushings (1) and replace if necessary.
Lightly grease bearing bushings (1).
Replace rubber grommet (2) if necessary.
RA Removing and installing / replacing clutch pedal
BMW AG - TIS
15.02.2013 21:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -