Z Series E85 Z4 3.0i (N52) ROADST
Important!
The screw connection must be tightened to the specified
torque in one go!
Do not under any circumstances retighten the screw
connection!
Press wheel electronics gently into well base and tighten Torx
socket screw (1).
Installation:
Tightening torque 36 11 2AZ
.
RA Removing and installing / replacing RDC wheel electronics
BMW AG - TIS
15.02.2013 21:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
