Z Series E85 Z4 3.0i (N52) ROADST
Mark severance cuts (2) to prespecified measurements and cut.
Measurement a = approx. 70 mm in front of bore dia. 6 mm.
Measurement b = approx. 40 mm behind bore dia. 6 mm.
Open weld joints in areas (1) and remove outer rocker panel.
Installation:
Weld in reinforcing panels at all severance cuts.
RA Replacing cover for left or right frame side member (partial replacement between
BMW AG - TIS
15.02.2013 22:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -