Z Series E85 Z4 3.0i (N52) ROADST
41 11 155
Replacing cover for left or right frame side
member (side panel removed at front and
rear)
Read contents of Body, General.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 155).
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Outer rocker panel
-
(2) A-pillar, outer (illustration similar for Coupé)
-
(3) Connecting plate, side frame
Open weld joints in areas (1).
RA Replacing cover for left or right frame side member (side panel removed at front
BMW AG - TIS
15.02.2013 22:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
