Z Series E85 Z4 3.0i (N52) ROADST
51 11 050
Removing and installing / replacing carrier for
front bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
Release expander rivets (1) and remove impact absorber (2).
Release screws (1 and 2) on left/right and remove carrier (3).
Tightening torque 51 11 5AZ
.
RA Removing and installing / replacing carrier for front bumper trim
BMW AG - TIS
15.02.2013 22:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -