Z Series E85 Z4 3.0i (N52) ROADST
M Roadster and M Coupé:
Fit new filler elements (1).
Important!
Adhesive areas must be dry and free of dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
Lay 6 mm dia. butylene tape on area (A) of filler elements (1).
Heat butylene tape with a hot air blower.
Stick filler elements (1) on marked area of bumper trim (2) and
firmly press down all round.
RA Replacing front bumper trim
BMW AG - TIS
15.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
