Z Series E85 Z4 3.0i (N52) ROADST
51 12 050
Removing and installing/replacing carrier for
rear bumper trim (US version)
Necessary preliminary tasks:
•
Remove rear bumper trim
•
Remove trim on tail panel
If necessary, unclip aerial (1) in area (2).
Release retaining elements (1) on left/right and remove impact
absorber (2) on left/right.
Release bolts (1) on left/right and remove carrier (2) straight
towards rear.
Tightening torque 51 12 2AZ
.
RA Removing and installing/replacing carrier for rear bumper trim (US version)
BMW AG - TIS
15.02.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
