Z Series E85 Z4 3.0i (N52) ROADST
51 13 311
Replacing trim strip on left or right roof gutter
Important!
The Instructions on component cementing with double-sided
adhesive tape serve as the basis for this repair instruction and
must be observed without fail.
Detach seal (1) from window frame and trim strip (2).
Note:
Seal (1) is bonded to body in area (A) and must not be detached
at this point.
Detach trim strip (2) from window frame.
Installation:
Position trim strip (1) over aperture (3) in A-pillar (1) and stick
on parallel to A-pillar (1).
Press trim strip (1) down firmly over entire length.
Installation:
Attach 6 mm dia. butylene tape between seal (1) and trim
strip (2) according to measurement (A).
A= 75 mm
Fit seal (1) on A-pillar.
Seal (1) must be seated in area (3) without gap on trim
strip (2).
RA Replacing trim strip on left or right roof gutter
BMW AG - TIS
15.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -