Z Series E85 Z4 3.0i (N52) ROADST
51 21 200
Removing and installing/replacing outside
handle and lock actuation of left or right front
door
Necessary preliminary tasks:
•
Remove sound insulation from front door
•
Remove outside handle on front door
Driver's side only:
•
Remove lock cylinder for front door
Release screws (1) and slide lock actuator (2) forwards slightly.
Disengage Bowden cable (5) from mounts (3 and 2).
Lever out lock actuator (6) towards front and remove to inner door
plate.
Important!
Bowden cable (5) must:
-
be correctly positioned in guide (4) of lock actuator (6)
-
be laid without kinks in bend to door lock (1)
RA Removing and installing/replacing outside handle and lock actuation of left or r
BMW AG - TIS
15.02.2013 23:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
